This is a widget area - If you go to "Appearance" in your WP-Admin you can change the content of this box in "Widgets", or you can remove this box completely under "Theme Options"

CS Hyde Conformable PTFE Tape With Silicone Adhesive, Brown 1/2 inch X 36 yards

Pinned on June 29, 2012 at 11:59 am by admin

CS Hyde Conformable PTFE Tape With Silicone Adhesive, Brown 1/2 inch X 36 yards

Conformable Teflon tape with pressure sensitive silicone adhesive is a high-density tape that offers greater tensile strength, higher dielectric properties and less elongation that regular Teflon tape. This tape is the ultimate in release, durability, low stretch / high strength characteristics. It releases cleanly without residue at high temperatures. This product is used in electrical applications such as coil wraps and separators, transformer, slot liners and harness wrapping where good insulation and heat resistance are needed.

Product Features


R. Meek says:

Very useful where appropriate I have used this on the bottom edge of wooden drawer sides with very good results. I have several items that have rather poorly designed drawers, or that are so old the center guides are wearing out and the drawers rub too much. It is plenty sticky enough to adhere to the wood and so far has not come loose. I’ve had it on there for several months now.I’ve tried paraffin with limited success, but the tape works much better. It will eventually wear out, but it has held up well and is easily replaced. Much easier than adding drawer slides or rebuilding the center guides. Should be useful for other applications, as well. Not something I can easily find in stores, so glad it was on here.

ftrain says:

CS HYde Conformable PTFE Tape with Silicone Adhesive CS Hyde Conformable PTFE Tape With Silicone Adhesiveis too flimsy to be used for outdoor tracks such as screens or sliding glass doors. Better for indoor tracks.

Write a comment